Pocket Hole Machines are packed with features that will help to make all of your woodworking projects a breeze Pocket hole machines help you make professional strong joints for cabinet building, making furniture, building bookcases and more. The only limit to using pocket hole machines is your imagination.
Introducing the Semi-Automatic, FOREMAN Pocket Hole Machine. Have you gone far enough in your woodworking projects that you need some automation? If your needs have gone beyond the pace of using the manual Kreg pocket hole jigs, you owe it to yourself to look into the Foreman Pocket Hole Machine. The Semi-Automatic Kreg DB110 Foreman has an electric drill motor, and also features clamping cylinder that is fully adjustable. Operation of this machine couldn’t get any easier. Just position the material to be drilled and pull the lever. Pulling the lever forward will activate the 3/4 hp drill motor while at the same time automatically clamping the material. Pull the lever further to finish the drill stroke, when the drilling is done, return the lever to the home position to get set up for the next piece.
The Kreg DK5100 Pocket Hole Machine has multiple spindles that allow it to drill up to 5 pocket holes in just one machine cycle. Think of the time you can save if you are doing big runs for furniture or cabinetry. The DK5100 also allows you the capability to actuate each drill motor individually.
Kreg’s newest Pro Series tool is a welcome addition to it’s fine line of tools. The DK3100 three-spindle pocket hole machine. Kreg has come up with an innovative three-spindle design, the DK3100 is the only pocket hole machine that you can buy with the ability to drill two pocket holes in one machine cycle across rails of varying widths. The drill spindles are fixed at 3/4″, 1″ and 1-3/4″ on center which will allow it to handle all of the most common rail widths of 1-1/2″ up to 3-3/4″ with ease. The DK3100 utilizes three step drill bits eliminate clogging when drilling pocket holes. One of the bits utilized is left-handed.
www.eagleamerica.com For 1/2″ to 1-1/2″ thick material. Wood chip relief holes remove chips rapidly, reducing the bit wear and effort required. Clamp adapter allows standard C-clamps or optional face frame clamp to hold the jig.
